Polaris 2012 FS IQ WideTrak Manual de usuario Pagina 144

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 143
140
TROUBLESHOOTING
Suspension Troubleshooting
Problem Solution
Rear suspension
bottoms too easily
Set static sag (see page 52). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag
dimensions.
Rides too stiff in rear Check for binding suspension components and grease all
pivot points.
Set static sag (see page 52). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag
dimensions.
Too much weight
transfer when
climbing
Set static sag (see page 52). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag.
Move limiter strap to high position (see page 54).
Too little weight
transfer when
climbing
Set static sag (see page 52). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag.
Move limiter strap to low position (see page 54).
Front end pushes Check for worn skags.
Check for binding front suspension shafts/steering compo-
nents, grease all pivot points (elevate front of machine).
Set static sag (see page 52). Adjust torsion spring blocks or
install optional torsion springs to achieve correct sag.
Increase IFS preload (if equipped) (see page 50).
Move limiter strap to high position (see page 54).
Steering is heavy Make sure spindles and all steering components turn freely.
Check ski alignment (see page 128).
Check skags and skis for damage.
Set static sag (see page 52).
Machine darts from
side to side
Check ski alignment (see page 128).
Check for binding front suspension shafts/steering compo-
nents, grease all pivot points (elevate front of machine).
Check for excessive play in steering assembly (see dealer).
Ensure skags are straight on skis.
Set static sag (see page 52).
Check rail slide/replace if worn (see page 126).
Vista de pagina 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 159 160

Comentarios a estos manuales

Sin comentarios