Polaris 2013 WideTrak LX Manual de usuario descargar pdf (Pagina 93)

MAINTENANCE

Track

Moving parts can cut and crush body parts. When performing the checks and

adjustments recommended on the following pages, stay clear of all moving

parts. Never perform track measurement or adjustments with the engine

running.

Track Tension

Track adjustment is critical for proper handling. Always maintain

correct tension and alignment. Tension adjustments should be made

only after the track is warmed up and limber.

WARNING! Improper track tension can cause serious damage to the

snowmobile, which can result in loss of vehicle control and serious injury or

death. Always maintain the track tension as specified.

1. Turn the engine off.

2. Lift the rear of the snowmobile and safely support it off the ground.

3. Place the recommended weight or downward pressure on the track

at the location specified (see chart and illustration).

4. Measure at the point where the weight is hanging.

5. Check for specified slack between the wear surface of the track clip

and the plastic rail slide.

Weight Measurement

Location

Measurement

10 lbs. (4.54 kg) 16 inches (40 cm) ahead of

forward idler wheel shaft bolt

3/4-1 inch (2-2.5 cm)

WARNING

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 130 131

Sin comentarios

Polaris 2013 WideTrak LX Manual de usuario Pagina 93