Polaris 2015 ATV Interactive Digital Display Manual de usuario

Pantone 419CInteractiveDigital DisplayOwner’s Manual

9General InformationDevice Operating RequirementsPhone functionality is dependent on the capabilities of your cell phone. Text messaging functionality

10Display KeysUse the five display keys to access the IDD menus. Press and release any key to display the IDD menu icons at the lower edge of the scre

11Key 1 - Alternate Home Screen Selection1. Press any key to display the IDD screen icons.2. Press Key 1 repeatedly to display each home screen option

12Key 3 - Main Menu1. Press any key to display the IDD screen icons.2. Press Key 3 to display the main menu options.3. Toggle through the menu.Key 2:

13Maps/TrailsView Map1. Press any key to display the IDD screen icons.2. Press Key 3 to display the main menu options.3. Toggle to MAPS/TRAILS. Press

14GPS/Tracks MapUse the display keys to navigate the GPS/Tracks menu.Key 1: Center the map on your GPS location. The centering will occur after vehicl

15Keyboard Operation1. Use the display keys to navigate the keyboard.Key 1: Move leftKey 2: Move upKey 3: Select the letter or numberKey 4: Move downK

164. The phone main menu screen displays.5. Use the display keys to navigate the phone main menu.Key 1: Missed CallsKey 2: Text MessagesKey 3: Turn Bl

17GPS Settings1. Press any key to display the IDD screen icons.2. Press Key 3 to display the main menu options.3. Toggle to GPS MANAGER. Press Key 3 t

18When Go To is turned ON in the Waypoint Manager, an arrow displays on the map, pointing in the direction of the selected waypoint. This feature can

1

19Importing and Exporting Tracks and WaypointsImporting or exporting tracks and waypoints requires a USB drive in the accessory connector. An exported

204. Press Key 3 to confirm. Press Key 5 to reject.5. If exporting, the file will be saved to the USB drive. Key 1 Key 2 Key 3 Key 4 Key 5Key 1Key 2Ke

216. If importing, the processing screen displays.Possible ErrorsOne of the following screens displays if a processing error occurs.• The device does

22• The file or file name contains an error.Satellite StatusIn the GPS Manager menu, select Satellite Status. The screen displays all available satell

23System Settings1. Press any key to display the IDD screen icons.2. Press Key 3 to display the main menu options.3. Toggle to System Settings. Press

24Display1. In the System Settings menu, select DISPLAY.2. Toggle to the desired setting.• Day/Night mode• Brightness level• Language• Demo (enable/di

25Service and Engine Hour Information1. In the System Settings menu, select SERVICE.• Engine Hours displays hours of engine operation since manufactur

26UnitsThe units can be set to display U.S. customary units or the International System of Units (metric) and a 12-hour clock or a 24-hour clock.1. In

27Time1. In the System Settings menu, select TIME.• Source (GPS satellites or Internal Clock)• GMT (Greenwich Mean Time) Offset• DST (Daylight Savings

28System Info1. In the System Settings menu, select SYSTEM INFO.2. View the following system information in this display.•IDD Serial Number• Bootloade

2Copyright 2014 Polaris Industries Inc. All information contained within this publication is based on the latest product information available at the

29Diagnostics1. Press any key to display the IDD screen icons.2. Press Key 3 to display the main menu options.3. Toggle to DIAGNOSTICS. Press Key 3 to

30IDD for SnowmobilesGeneral Snowmobile IDD InformationCertain Polaris IDD features are active only when using the display on snowmobiles. Some IDD fe

31IDD Power SourcesOn snowmobiles equipped with an electric start battery and IDD, always turn the key off when the IDD is not in use. If the key rema

32Initialization ProcessThe initialization process must be performed when the engine is running. Not all models require this procedure. See page 30.1.

334. Press Key 3. The display will reboot and begin the configuration process.Left Hand ControlsThe left hand controls on AXYS and 600/800 PRO-RIDE mo

34MODE and SET SwitchPressing the MODE and SET switches quickly (press/release) or slowly (hold 2 seconds or longer) allows riders to change a variety

35Vehicle Settings1. Press any key to display the IDD screen icons.2. Press Key 3 to display the main menu options.3. Toggle to System Settings. Press

36Fuel Type Selection (Ethanol/non-Ethanol)1. In the Vehicle Settings menu, toggle to FUEL TYPE.2. Press Key 3 to select.3. Press Key 2 or Key 4 to to

37Lock the IgnitionFirst Time ActivationSnowmobiles equipped with the IDD are equipped with a security function that can be activated by an authorized

386. Press Key 2 or Key 4 to enter the current 3-digit security code. Press Key 5 to toggle to each digit.7. If the code is not accepted, a BAD CODE s

3Table of ContentsWelcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Quick Start Guide . . . . . . . . . . . . . . . . .

39Unlocking the Ignition1. Start the engine. The locked symbol and ENTER CODE screen displays. Do not allow an engine to run in an enclosed area witho

40Change Security CodeThe first time you change the security code, enter the default security code (000) at step 4. 1. Start the engine. Do not allow

415. After successfully entering the current security code, the CHANGE CODE screen will display. Enter your new 3-digit security code.6. Any time you

42Detonation Elimination Technology (DET)The DET system prevents damage to the engine from detonation by entering an engine protection mode whenever t

43Engine Overheat IndicatorsTemperature ScaleThe engine temperature scale at the right side of the IDD screen changes to RED and the check engine temp

44BluetoothBefore ConnectingCompatibility1. Refer to your phone’s user manual before attempting to connect to the IDD.• Review how to connect your pho

45Connection ManagementEnabling/Disabling Bluetooth1. Press any key to display the IDD screen icons.2. Press Key 3 to display the main menu options.3.

46Bluetooth Settings1. With the phone main menu screen displayed, press Key 4 to open Bluetooth Settings.2. When the display opens Bluetooth Settings

473. When the search is completed, the IDD displays any devices found. Press Key 4 to toggle through the list. The indicators at the lower right edge

48Pairing From the Display1. Refer to your phone’s user manual before attempting to connect to the IDD. See page 44.2. Toggle through the list to the

4WelcomeThank you for purchasing a Polaris Interactive Digital Display (IDD), and welcome to the Polaris RiderX family. Your IDD is easy to use and wi

496. When the device is connected, the Pairing Complete screen displays.7. Press Key 3 to exit.Pairing From the DeviceTo pair from the device follow t

50Connecting a Formerly Paired Device1. To connect a device that was previously paired, toggle to the device in the display. Press Key 3.2. After conn

51Unpairing a Device1. If the device is connected, disconnect the device before unpairing.2. To unpair a device, toggle to the device in the display.

52Changing Device Automatic Connection Priority1. To change which device automatically connects, toggle to the desired device in the display. Press Ke

53PhoneIf a phone call is received while the phone is connected, the caller’s name (if available) or phone number (if supported) displays. Press Key 5

54View Missed Calls List1. With the phone main menu screen displayed, press Key 1 to request missed calls. The screen displays the phone symbol and “R

553. If the phone is compatible, the screen displays the most recent missed calls (up to 20) or “No Missed Calls”.4. Press Key 2 or Key 4 to toggle th

562. If an error occurs during the request, an error message screen displays.• “Data Request Timeout”: Press Key 3 to accept. Press Key 1 to repeat th

573. If the phone is compatible, the screen will display a list of the unread messages. If there are no unread messages since the device was paired, “

58RiderXRiderX is the #1 resource for power sports enthusiasts. RiderX provides everything you need to enhance your riding experience. For the Polaris

5Quick Start GuideBefore Riding With Your New IDD1. Read this entire manual.2. Familiarize yourself with the features and operation of the IDD while t

59RANGER ModelsThe USB connector (if equipped) is located inside the glove box.AXYS Snowmobile ModelsThe USB connector (if equipped) is located under

60Connect, Register and UpdateConnect Your Smartphone to the IDDThe Polaris IDD can be used with most smartphones. RiderX can be used to provide trail

61Register an IDD (Rider or Dealer)Be prepared to provide the following information when registering an IDD:• The vehicle’s Vehicle Identification Num

62Download the Data1. Log in at RiderX.com.2. Select Digital Displays.3. Select Download Trails Data (recommended every 90 days) or Download Trails an

63Update the IDD1. Before updating the IDD, always export your existing tracks and waypoints to a USB drive to avoid losing them. When the IDD update

648. Compare the “Trails date” on this screen with the “date modified” of the newly downloaded file on your USB drive or computer. 9. Continue with th

6513. After the restart, read the warning message.“WARNING! Maps/Trails are supplied as an aid and should not be used for any purpose requiring precis

6617. Wait for the process to complete. If the update indicator at the upper left corner of the screen is spinning, the update is processing even if t

6722. Repeat steps 3-7 to verify the update in SYSTEM INFO. The “Trails date” should now reflect the more recent file date.23. Press Key 3 to exit.24.

68Manual IDD UpdateUse this procedure only in the event of a failed update using the previous procedure.1. Delete the formerly downloaded (corrupt) fi

6The icon bar at the top of the screen allows quick access to cell phone-related information, a real time clock and the GPS heading.In most situations

69Verify the Update in MAPS/TRAILS Display1. Press any key to display the IDD screen icons.2. Press Key 3 to display the main menu options.3. Toggle t

70Update Process Flow ChartThis flow chart is a condensed version of the procedures outlined on the preceding pages.Log in at RiderX.comSelect DIGITAL

71Frequently Asked QuestionsQ: How do I register my device?A: Log in at RiderX.com to register your device and receive access to maps and trails updat

72Q: How do I set the security function on the display for my snowmobile?A: Refer to Lock the Ignition on page 37.Q: How do I connect my phone via Blu

Pantone 419CFor your nearest Polaris dealer,call 1-800-POLARIS (765-2747)or visit www.polaris.comPolaris Industries Inc.2100 Highway 55Medina, MN 553

7Interactive Digital DisplayThe Polaris IDD features a 4.3-inch high resolution full color LCD display that provides access to the following informati

8Software UpgradesUpdate software for the life of the vehicle. Update the IDD every 90 days or more often (especially before long trips) to ensure the