Polaris 2013 BRUTUS Operators Handbook Manual de usuario descargar pdf (Pagina 8)

9924342 8

LEAVING THE VEHICLE

PUTTING ON THE ATTACHMENT USING PRO-TACH

NA5901

2

1. Lower the attachment arm and put

the attachment flat on the ground.

1

NA5920

2. Move the gear selector lever to Park.

Disengage the PTO system (if

equipped). Stop the engine and

remove the key.

Attachment pins must be fully installed

and secured with the retainer pins.

Failure to fully install and secure pins

can allow the attachment to come off and

cause serious injury or death.

WARNING

Slowly drive forward until the front

edge of the attachment interface is

completely under the top lip of the

attachment.

Tilt the attachment interface backward

until the attachment is slightly off the

ground.

Move gear selector to PARK and stop

the engine.

Remove the two pins from the storage

location. Install the pin (Item 1) and

retainer pin (Item 2), both sides, to

secure the attachment to the

attachment interface.

Keep pins in their storage location

(Item 3) when no attachment is

installed.

NA5915

3

2

1

1

2

WARNING

Always park vehicle on flat level

ground.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comentarios a estos manuales

Sin comentarios